? 2000 teledyne relays 800-284-7007 ? www.teledynerelays.com gc 1 10a, 230/240vac, 300vdc single throw four/six/eight/ten pole electrical specifications general specifications parameter min typ max units operate time (see note 1) 30 msec release time (see note 1) 7 msec switching frequency 5 hz shock (11 msec, see note 3) 10 g vibration (10-100 hz, see note 3) 10 g electrical life 10 5 cycles mechanical life 10 7 cycles ambient temperature -25 80 o c contact specifications maximum load current 2 contacts 10 a 3 contacts 8.4 a 4 contacts 7.3 a 5 contacts 6.5 a 6 contacts 5.9 a 7 contacts 5.5 a 8 contacts 5.1 a maximum switching voltage 230/240 vac 300 vdc maximum load capacity (resistive) 2000/120 va/w series gc force guided relay rated for 10a, 230/240 vac, 300 vdc available in 4, 6, 8 or 10 pole configuration. see table 1 for part numbers. features: ? force guided contacts per en50205: consists of at least one no and one nc contact mechanically linked. this allows the contacts behavior to be pre- determined and the user the ability to monitor the contact.the mechanism provides true status. ? dielectric designed for 3-phase systems. ? contacts are physically linked making it impossible for a no and nc to be closed simultaneously. ? internal creepage distances and clearances are designed for overvoltage category iii and degree of pollution 2 per iec 60664. ? wide range of contact configurations and coil voltages. approvals: ul: approved tuv / csa: pending accessories:contact factory current regulator unit dil housing current regulator unit so.8 housing retaining clip new series gc relays
gc 2 specifications are subject to change without notice ? 2000 teledyne relays 6 pole package outline dimensions series gc 4 pole package ( mm ) maximum switching capacity ac15-230/240v 4 arms (inductive) dc13-24v 2 adc contact resistance (see note 2) 100 mohm dielectric test voltage (o=iii, p=2) coil to contact 2500 vac contact to contact 2500 vac table 1 part no. contacts contact material coil resistance coil voltage (/gold plating) (ohm)12% (nominal @ 25c) gc35-1097 3no/5nc agcdo/5.0um 320 24 gc31-1100 3no/1nc agcdo/0.2um 480 24 gc22-1121 2no/2nc agcdo/5.0um 480 24 GC22-1123 2no/2nc agcdo/5.0um 2,700 60 gc42-1128 4no/2nc agcdo/0.2um 480 24 gc42-1135 4no/2nc agcdo/5.0um 480 24 gc33-1149 3no/3nc agcdo/5.0um 480 24 gc33-1151 3no/3nc agcdo/5.0um 2,700 60 gc44-1161 4no/4nc agcdo/5.0um 320 24 gc44-1163 4no/4nc agcdo/5.0um 1,870 60 gc62-1168 6no/2nc agcdo/0.2um 320 24 gc62-1175 6no/2nc agcdo/5.0um 320 24 gc53-1183 5no/3nc agcdo/0.2um 320 24 gc64-1220 6no/4nc agcdo/5.0um 350 24 characteristics table
? 2000 teledyne relays 800-284-7007 ? www.teledynerelays.com gc 3 8 pole package 10 pole package ( mm ) ( mm ) 2no/2nc package ( mm ) 3no/3nc package ( mm ) 4no/4nc package ( mm ) 4no/2nc package ( mm ) 6no/2nc package ( mm ) 6no/4nc package ( mm ) outline dimensions ( cont.) notes: 1) timing varies with coils voltage. 2) for new contacts only. 3) contacts will not chatter in excess of 1ms. series gc (view from terminals)
|
